Chargery BMS and DCC

Home Forums Support Chargery BMS and DCC

Viewing 1 post (of 1 total)
  • Author
    Posts
  • #37540
    Podbuilder
    Participant

    Hello, Im using the chargery BMS and DCC with a KLS96401 controller. Chargery want the DCC fitted to the B- wiring. This will break the circuit if the maximum AMP are exceeded or if the battery voltage is faulting. Will breaking the circuit on the B- negative wire damage the KLS96401?

    The DCC has a Built-in the surge suppressing circuit, thereby eliminating the need for the additional Relay Delay Time board which is used to avoid a surge current when starting to charge or discharge.

    Info on the DCC can be found here.

    Thanks

Viewing 1 post (of 1 total)
  • You must be logged in to reply to this topic.