PM - Full Bridge 4Q Permanent Magnet DC Motor Controller with Regen (12V-120V) (100A-300A)

Electronic Reversing
No Reversing Contactor Needed
Fast Direction Change
High Reliability and Efficiency
Low noise, No arc, No wearing, No life limit
Easy Maintenance

Share

$169.00$399.00

Additional information

Weight 3.8 lbs

Description
ModelBattery VoltageMax Operating VoltagePeak Current 1 MinuteContinuous CurrentWith Regn
PM2410112-24V30V100A40A*
PM2420112-24V30V200A80A*
PM2430112-24V30V300A120A*
PM3610124-36V45V100A40A*
PM4810124-48V60V100A40A*
PM4820124-48V60V200A80A*
PM4830124-48V60V300A120A*
PM7210124-72V86V100A40A*
PM7220124-72V86V200A80A*
PM7230124-72V86V300A120A*
PM12101H24-120V144V100A40A*
Kelly PM Full Bridge Permanent Magnet DC Motor Controller with Regen

Features:

  • Intelligence with powerful microprocessor.
  • Synchronous rectification, ultra low drop, and fast PWM to achieve very high efficiency.
  • Electronic reversing.
  • Voltage monitoring on voltage source 12V and 5V.
  • Current limit and torque control. Configurable torque mode and speed mode.
  • Low EMC.
  • LED fault code.
  • Battery protection: current cutback, warning and shutdown at configurable high and low battery voltage.
  • Rugged aluminum housing for maximum heat dissipation and harsh environment.
  • Rugged high current terminals, and rugged aviation connectors for small signal.
  • Thermal protection: current cut back, warning and shutdown on high temperature.
  • Configurable high pedal protection: the controller will not work if high throttle is detected at power on.
  • Brake switch is used to start regen.
  • Support three modes of regenerative braking: brake switch regen, release throttle regen, 0-5V analog signal variable regen.
  • PWM-able Reverse Alarm.
  • Brake Switch for regeneration.
  • Analog Brake Input for continuous variable regeneration.
  • Full Programmable with RS-232. Software upgradable. Free Windows GUI software.
  • Standard PC/Laptop computer to do programming. No special tools needed.
  • User program provided. Easy to use. No cost to customers.
  • No adjustment.

General Specifications:

  • Frequency of Operation: 16.6kHz.
  • Standby Battery Current: <0.5mA.
  • 5V Sensor Supply Current: 40mA.
  • Supply Current, PWR, 150mA.
  • Standard Throttle Input: 0-5 Volts. Producing 0-5V signal with 3-wire pot.
  • Analog Brake and Throttle Input: 0-5 Volts.
  • Reverse Alarm, Main Contactor Coil Driver, Meter.
  • Full Power Temperature Range: 0℃ to 50℃ (controller case temperature).
  • Operating Temperature Range: -30℃ to 90℃ , 100℃ shutdown (controller case temperature).
  • Max Battery Current: Configurable.

Downloads: 

Kelly PM Controllers User Manual

Kelly PM Controllers Configuration Program

Kelly PM Assembly Wiring Diagram

Kelly PM Assembly Wiring Diagram (With F-N-R function)